Flashing

Install the firmware from your browser over USB.

Use the web flasher in a Chromium browser (Chrome or Edge) - no drivers or desktop app needed.

Steps

  1. Plug the board into a USB port with a data-capable USB-C cable.
  2. Open the flasher and click Install.
  3. Pick the board’s serial port when the browser asks.
  4. Wait for it to finish, then unplug and re-plug the board.

The flasher writes the bootloader, app and the on-device config Web UI in one go.

Full wipe

Leave Full wipe off to keep your saved settings and camera pairing across updates. Turn it on to erase everything and start clean. Note that a firmware update which changes the settings schema resets settings to defaults on its own.

Recommended on the first flash.